Multiple layers of expanded aluminum, enclosed in a medium weight aluminum frame. Designed for air applications such as make up air roof top units in light industrial, commercial, schools, and office buildings where a lighter weight washable filter is recommended. They can also be used as pre filters, which would remove large particles that easily clog a filter. Pre filters keep the main filter lasting longer and the unit running more smoothly.
Multiple layers of expanded aluminum, enclosed in a heavy weight aluminum frame. Designed for air applications such as make up air roof top units in industrial, commercial, schools, office buildings, hospital, and hotels where a medium weight washable filter is recommended. They can also be used as pre filters, which would remove large particles that easily clog a filter. Pre filters keep the main filter lasting longer and the unit running more smoothly.
Multiple layers of expanded Galvanized Steel, enclosed in a medium weight Galvanized Steel frame. Designed as a less expensive option for air applications such as make up air roof top units in industrial, commercial, restaurants, schools, and office buildings where a washable filter is recommended. They can also be used as pre filters, which would remove large particles that easily clog a filter. Pre filters keep the main filter lasting longer and the unit running more smoothly.
Multiple layers of expanded Galvanized Steel, enclosed in a heavy weight Galvanized Steel frame. Designed for air applications such as make up air roof top units in industrial, commercial, schools, and office buildings where a heavy weight washable filter is recommended. They can also be used as pre filters, which would remove large particles that easily clog a filter. Pre filters keep the main filter lasting longer and the unit running more smoothly.
The 304 Stainless Steel Filter is the heaviest mesh filter available and is designed for applications that require the utmost in filterability. Made from 304 stainless steel, this filter can hold up to the toughest conditions, in air applications. It can withstand harsh chemicals when it comes to cleaning.
The 430 Stainless Steel Filter is a heavy stainless steel filter made for a long life in difficult filtering areas. Made from 430 stainless steel, this filter has the qualities of a stainless steel filter at a lower cost.
The Fire Guard “G” is a heavy Galvanized Steel grease filter. Manufactured with heavy 24 gauge Galvanized Steel, allowing for extra strength and rigidity in the range hood. The extra weight helps with vibration when inside the hood. The pad is enclosed in a heavy galvanized Steel frame, secured at one corner with rivets. Designed with the “Hood Cleaning” service in mind, these filters are made to hold up through the toughest conditions. Available in both stock and special sizes. When ordering, state vertical dimension first to assure proper installation.
Air filter performance is measured by dust holding capacity and efficiency. Greater dust holding capacity means longer service life and lower operating costs. Greater efficiency means cleaner air and reduced maintenance costs. The Smith Bag Filters excel in both of these performance characteristics. We have MERV 14, MERV 13, MERV 11, and MERV 9 available in both Synthetic and Fiberglass.
A unique, roll formed baffle filter designed to prevent flames from penetration through the filter into the grease hood and ductwork. UL approved for grease. The SMITH FIRE PATROL “G” is made from galvanized steel on both the baffles and the frame. Maximum temperature is 450 degrees F.
Three types of Handles are available. Bail Handles, Lock Type Handles, and Rigid Handles can be purchased separately or installed on your filter. When having installed, please indicate desired location on your filters frame. Clips are available in galvanized steel. Ludwig Clips are flat on the filter frame, and P-Clips are available in lengths between 1” to 6” and a 12” clip is also available.12” Spring Type clips as well as 2” and 4” pre-clips are also available.
The Perm-A-Foam filter is constructed with foam media pleated between our expanded aluminum media. Providing up to 40% more filtering area, this filter has a higher dust holding capacity than the flat faced foam filter. These filters are often used with electronic equipment. Should last for years if properly maintained.
The Pleated Filter is designed for longer life with reduced maintenance costs. All filters are designed for easy installation in existing HVAC systems. Performs well as the primary filter or as a prefilter to a more efficient filter.
The S-76 Pad Holding Frame is a rigid galvanized steel frame. Made with a 1 x 1 wire pad, found on the air exiting side of the frame. This allows a multiple numbers of filter media to be placed in front, completing the pad holding frame application. Three different gates are available to help hold the filter media in place. This filter is also available in Aluminum, Stainless Steel and 16 Gauge Galvanized Steel. These S-76 Pad Holding Frames are being used in spray booths, commercial units, ventilators, rooftop units, and many other applications where up to 550 FPM air velocity is present. Available in both stock and special sizes.
The Fiberglass Air Filter is made of fiberglass material, designed with small continuous fibers to allow for the greatest dust holding capacity. An adhesive is applied to prevent fiber migration into the air ducts. The pad is enclosed in a chipboard frame. Available in both stock and special sizes. Special bottle-capping is available upon request (You can add 1 layer or bottle cap on both sides).
This filter is designed to filter out small dust particles in computers and other electronic equipment. It can also be used in machinery application vents, air cleaners and other uses where a permanent filter is advantageous. This filter is designed for years of use.