Showing all 6 results

Bag Filter 8-Pockets. MERV 14, MERV 13, MERV 11, MERV 9. Available in Synthetic and Fiberglass

Pocket Filter

Air filter performance is measured by dust holding capacity and efficiency. Greater dust holding capacity means longer service life and lower operating costs. Greater efficiency means cleaner air and reduced maintenance costs. The Smith Dura Pak filters (Bag Filters) excel in both of these performance characteristics. We have MERV 14, MERV 13, MERV 11, and MERV 9 available in both Synthetic and Fiberglass.

Read more


The Rigid Cell Filter is an extended surface medium and high efficiency rigid air filter. These are available in Merv 14, Merv 13, Merv 11 and Merv 9 in both synthetic and fiberglass. The filter media consists of high quality synthetic media, which forms a lofted filter blanket. This blanket is laminated to a high strength, reinforced backing. The media is then continuously bonded to an expanded metal support grid and is shaped into a wedge design, assuring maximum utilization of the filter media. The pleated filter media is reinforced and stabilized through the use of pleat spacers. The pad is enclosed in a corrosion resistant galvanized steel frame or a heavy plastic frame, depending upon the application. Headers are available upon request. This filter has been engineered to provide high efficiency filtration combined with prolonged life cycles. It is an ideal choice for variable air volume systems. Available in 6” and 12” depths.

Read more


The ASHRAE Filter is a HEPA type filter, available in Merv 14, Merv 13 and Merv 11. The filter is constructed of high strength, water resistant, glass micro-fiber paper in a pleated design. A corrugated aluminum separator is placed between each pleat, to prevent the pleats from touching. The media pack is installed into a heavy 24 ga. galvanized steel enclosure frame. A sealant is then applied to provide a positive seal between the media and the frame. The ASHRAE filter provides high efficiency filtration where clean air environment is a necessity. This includes, hospitals, laboratories, office buildings, food and beverage processing plants, and other applications that require high efficiency without needing the DOP rating. Available in 6” and 12” depths, 12 x 24 and 24 x 24 in each Merv rating. Headers available upon request.

Read more


Smith HEPA filters are designed to meet the highest level of filtration needed in application such as: pharmaceutical, hospital, electronic component manufacturing, aerospace, food processing and all facilities that must have HEPA filtration.

All HEPA filters are manufactured to Federal Mil Spec 282 and UL 586. They are tested and scanned
on .03 micron, in accordance with IEST-RP-CC034.1. Each filter is inspected, tested and scanned before it
leaves the lab.

Read more


Auto Rolls are available in both high loft gradient density glass and non-glass synthetic replacement rolls. Designed for deep dirt penetration as well as high filtration efficiency. Equipped with a five foot, double stitched, paper leader and trailer which allows for easier handling and installation. Available in multiple sizes and core types. These auto rolls are designed for air handing units that support an automatic roll media.

Read more


Woven Filter bags are made from multifilament mesh and monofilament nylon. The multifilament mesh is a woven fabric with each thread made of many smaller diameter threads twisted together. Monofilament nylon is a woven fabric made with a single continuous untwisted thread. Made into bags, these filters fit over motors and other areas that need to keep dust and dirt out of a machine. Non-Woven (Felts) are bags made from polyester or polypropylene fibers. These Medias, due to their construction, cannot be cleaned or reused. These filters offer depth filtration as the dirt particulates must follow tortuous paths in order to pass through the media wall. Multiple pad widths and depths are available in the bags.

Read more